Continuing Education Blog

PNCA offers evening and weekend classes for adults and young people. For adults we offer courses in art, craft, and design, as well as professional development classes. For children we have Saturday classes during the school year and week-long camps during the summer. In addition to our regular teen classes, we also offer immersive summer Pre-College Studios. Our blog below gives you an idea of some of the goings on, and you can see our full course catalogue online here.


Scholastic Art Awards - 2014

Another great Portland Metro Scholastic Art Awards exhibition at PNCA! This year’s exhibition is exceptional. Gold Key winning artwork is on view in the Commons of PNCA’s Main Campus building through February 28.

If you plan to check out the work while it is up you should set aside a good chunk of time. There is a great deal of artwork on display and the quality is such that you will want to take your time to really look at everything.

   Share
* * *

Ukulele Week 8 and beyond

Ukuelel

The eighth class and extra session concentrated on adding, leveling and shaping the frets. Hammering them into place was the quick part of the job, the leveling (through sanding flat) and shaping took the bulk of the time. We also cut the bridge out rosewood and epoxied it to the body. The shaping of the head was finished, the nut shaped and the saddle was added to the bridge. The lacquering process which took a couple of days and a lot of spraying, waiting and sanding was completed at home.

To complete the process the holes for the strings were drilled through the bridge and body. Using beads tied onto the strings, they were strung through the body and wound on the tuners. After a bit of adjusting the nut and saddle it was good to go.

   Share
* * *

Chair Prototypes

Chair

Images from Continuing Education’s recently completed Chair Prototype class.

Chair

Chair

Chair

   Share
* * *

Ukulele Week 7

uke class 7

Week 7 was a busy a busy week in the woodshop. On Thursday we started working on shaping the heel of the neck, adding the bolt to connect to the body and adding the head laminate.

The first step in shaping the heel by roughly cutting it out on the bandsaw. Followed by using the oscillating sander to shape the curve. The front of the headstock was made square on the belt sander.
neck uke

Next we used the jig to measure and drill the hole for the bolt in the body and the nut in the neck.

uke neck jig

Saturday! Max lead the open work time in the woodshop on Saturday where work began on cutting the banding. This involved using a router mounted to a guide arm. This was a nerve wracking experience with the possibility wrecking all of the work on the body.

Channel cutting

After this was finished the binding was glued into the notch that was just cut.

Uke Binding
Next week, getting toward the end.

   Share
* * *

Ukulele Class Six

uke body

I this week’s class we worked on preparing the neck block and a bit of catching up with constructing the body.

The first step of the neck was gluing the neck piece together at the scarf joint (which were pre-cut, thanks to Frank). We put glue on and and allowed it to dry on the exposed joint to provide a tackier surface when they are glued and clamped.

uke neck

To clamp them a jig was set up on the table and the neck laid on its side. The jig prevented the two pieces from sliding apart.
ukejig

After drying the heel was added to the neck. This was much simpler glue and clamp job.

uke heal

Next week we finish the neck shape and fingerboard.

   Share
* * *

Picture(s) of the Week - 11/9/2013

We had another great week with the PNCA Youth Program. So many wonderful things are in the works! This week we decided to share more than one image with you so that you could get a sense of all the great happenings taking place.

Animal Art
We went to the Zoo!

Art + Storytelling: Fables
We used substantial amounts of glitter.

Screenprinting Workshop
We printed things with Pre-College.

Little Painter's Workshop
We danced a little bit.

Art + Storytelling: Fables
…. and, we made some awesome stuff.

Yes, indeed… this last Saturday was quite spectacular. If you would like to see more from the Youth Program, check out our Flickr site! PS, we are starting to post student work from this term. We hope you enjoy taking a look at all the things we have made!

   Share
* * *

Ukulele Class Five

Uke on Go-Bar

This week’s class focused on making the bracing, preparing the sides and attaching the soundboard and back.

Uke bracing
The bracing is made from pieces of spruce. These pieces were cut down to size and glued to the soundboard (supported on a flat surface) and the backs (supported on the 25 foot radius sanding disk, the braces for the back were sanded into this shape prior to gluing).

The back will have a slight dome shape giving the ukulele a stronger sound. The front is flat and you can see on the image below the patch to reinforce the bridge.
Uke Front Bracing

After the glue dried, mini planers and chisels were used to give the braces an arched shape and sloping toward the edges. This allowed for a lighter weight with plenty of support.
uke brace shaping

After completing the bracing we started working on evening out the sides of the uke, getting ready to add the soundboard and back. This involved an incredible amount of hand-sanding. The back on the 25ft dish and the front side on a flat surface. Notches were cut in the kerfing to allow the bracing to sit flush. The soundboard and backs are glued on using a go-bar system to hold the pieces together.
uke go-bar
Next class: preparing the neck and fretboard.

   Share
* * *

Picture of the Week - 10/26/2013

Our ‘Picture of the Week’ is actually several images this time. We hit the mid-term mark and wanted to show you the goings on with classes!

Little Painter's Workshop

Art + Storytelling: Fables

Animal Art

So many fun things are happening right now. If you would like to see more, visit our flickr site today! Just click: www.flickr.com/photos/pnca_youth/

   Share
* * *

Ukulele Class Four


Class four was all about the interior structure-the kerf binding and bracing, both the back and soundboard.


Reverse Kerfing


With the sides in the mold, we added the kefing pieces, which were pre-cut from mahogany. Using water and a heat gun, the were formed into the approximate shape, glued along the edges of the sides and clamped into place. The reverse kerfing will give the uke a solid structure and help it hold its shape.






While the kerfing dried, work began on making the bracing for the back.


Bracing


The bracing is made from 1/4 inch strips of spruce. The majority of the rest of the class was cutting and shaping the bracing and thickness sanding the soundboard and back in preparation for gluing in the bracing.



Next week- Gluing the bracing, sanding the body and more.


   Share
* * *

Ukulele Class Three

Rob

Class three focused on three parts of the construction-the decorative rosette, cutting the soundboard and back out, and adding the head and tail blocks to the sides of body. 


Rosettes


The class began the process of adding the rosettes by tracing the finished shape on to the soundboard and finding the center of the sound-hole and measuring out where our rosettes would be. Choosing from scrap strips of wood, plastic and paper we sorted out what would make up the rosettes and measured that thickness. Max got the  drill press with his circular cuter set up with the blades of the cutter matching the thickness of rosettes.


Now the materials were laid into the groove and glued into place. Followed by a run through the drum sander to smooth everything out and the back and soundboard cut into shape.








Tail and Head Block


The sides were placed back into the mold, measured and trimmed so that they lined up exactly. Each of the blocks was sanded to match the curve of the bottom or top and epoxied into place. While this was the step that required the least direction, the exacting nature of the fits made it more time consuming than expected. It was great to see the ukulele starting to take shape and gave us even more incentive to move forward.







Next week- kerfing the sides.


   Share
* * *

Page 2 of 13 pages  < 1 2 3 4 >  Last ›

Future Students ProgramsTransfer InfoGlobal StudiosVisitApply

Current Community HomeroomLibraryEmailRecords + Registration

Alumni ExhibitionsNews + NotesGifts to PNCATranscripts   

Continuing Education Courses + RegistrationProgram BlogYouthCE Contact

Museum of Contemporary Craft Main SiteHoursBecome a Member